Ceramic Fiber Boards for

Thermal Insulation & Fireproofing

Ceramic Fiber Board is a good choice for thermal insulation and fireproofing. It is made of Alumino-Silicate fibrous wool by vacuum forming process.

CHARACTERISTIC

Shorter heat up and cool down time
Resilience and resistance to thermal shock
Greater mechanical strength
Can withstand gas flow velocity of 30 m/sec
Even density, thickness
Flexible and easy to cut or install
Asbestos free

APPLICATIONS

Hot face lining material (alternative to blanket)
Back-up insulation

TECHNICAL DATA

Board Product	MCF1050	MCF1260ST	MCF1260HP	MCF1300HA	MCF1300LAZS	MCF1430AZS
Temperature Grade°C	1050	1260	1260	1300	1300	1430
Recommended Operation Temperature°C	≤950	≤1100	≤1150	≤1200	≤1200	≤1250
Permanent Linear Shrinkage (%)	950°C×24h≤4	1000°C×24h≤4	1100°C×24h≤4	1200°C×24h≤4	1250°C×24h≤4	1350°C×24h≤4
Thermal Conductivity (Mean Temp 500°C) W/(m·k)	≤0.153
Water Content (%)	≤1
Loss on ignition (%)	≤8
Nominal Density (kg/m³)	220~400
Al₂O₃	34~36	36~38	39~42	45~47	38~40
Al₂O₃+SiO₂	≥95	≥96	≥98	≥99	≥90
Al₂O₃+SiO₂+ZrO₂						≥99
ZrO₂					5~7	≥15
Fe₂O₃
Availability (Standard Product)	600/1200 mm width; 900 mm / 1000 mm Length; Thickness 3 mm~ 100 mm

Note: Test data shown are average results of tests conducted under standard procedures and are subject to variation. Results should not be used for specification purpose. The product is listed comply to ASTM C892.